I’ve been doing a lot of sand / glass-bead blasting recently. Mainly to get the 240Z parts ready for plating, painting, etc. But I had two major issues. 1. The cheap sandblasting cabinet which I bought long ago never had a dust-suction removed and the Lighting (old FL-tube type) was shit. 2: The compressor was way to small. Means it had to be running constantly (noisy) and secondly, it couldn’t keep the air-demand up, so the pressure always fell too low for proper blasting and I had to wait for the pressure to build up again. Time to change that. First, I attacked the Suction issue. The problem is, without…